Well Completion Equipment
The AirLockTM system facilitates landing casing in horizontal wells. Using the AirLock™ system reduces friction during the landing. The AirLock seal allows the vertical casing section to be filled with fluid, while the lateral section remains air-filled and buoyant. The enhanced buoyancy reduces sliding friction more than 50%.
14-stages Ball Drop MSFrac assembly
Designed for the high-angle vertically wells. It can be installed as an independent system. Designed for both cemented liner, and open hole. With option to make a fracturing up to 15 stages (with Toe Sleeve). No need to mill using coiled tubing if there are complications during hydraulic fracturing.
Liner Hanger VectorMax
SimpleStart toe sleeve
The pressure actuated sleeve incorporates a time-delay mechanism that permits a full casing pressure test before the sleeve opens to the formation. SimpleStart toe sleeve is the surest, simplest way to achieve initial formation access for multistage completions.
Sliding Sleeves GripShift
Closable sliding sleeves allow to perform Multi-Stage fracturing in any order, if needed to block watered intervals and perform re-stimulation of non-productive intervals, and shut off the unwanted gaz production and thief zones.